Sheet Metal







      
 
 
 
  I am in need of a 1967 Falcon Sport Coupe right hand aka passenger
 
  side front fender. Ford Replacement Part# C7DZ-16005-B
 

 
  Try www.joebfalcons.com for Joe B Sales located in Golden, CO
 
  (303) 279-4202 Talk to Tom or Joe
 
  15960 S. Golden Rd Golden, CO 80401-3736
 

 

 








      Paint Color for the Ranchero:  Fire Amber Pearl from 2000-2002 Dodge
 
 PPG code: 5583  Dodge code: PV3 Fire Amber Pearl
 
 PPG code: 5693  Dodge code: PVL Fire Amber Pearl
 
 PPG code: 61930 Dodge code: PVF Prowler Amber
 
    2006 Dodge Charger code: PVE ManGO, Go
 

 
 I am going to head to the Dodge dealer to get touch up paint in each 
 
 color.
 

 

 








      I started thinking about a mini-tub for the Ranchero
 

 
 It would need to be 36" long and 12" high.  It realy does not need
 
 to be 12" high.  There is only a few inches of travel.
 

 

 

 

 

 









 

 

 

 

 

 

 

 

 









 

 

 

 

 

 

 

 

 









 

 

 

 

 

 

 

 

 









 

 

 

 

 

 

 

 

 








      
 

 

 

 

 

 

 

 

 








      Here is what I picked up from Joe B Sales
 
 www.joebfalcons.com
 

 

 

 

 

 

 

 








      
 

 

 

 

 

 

 

 

 








      This is a 67 hood.  1966 and 1967 Falcon and Ranchero front end sheet
 
 metal is interchangable.  The hoods are identical between 66-67
 

 

 

 

 

 

 

 








      
 

 

 

 

 

 

 

 

 








      The price was right and Joe helped me pull the fender.
 

 

 

 

 

 

 

 

 








      
 

 

 

 

 

 

 

 

 








      
 

 

 

 

 

 

 

 

 








      This is a donor 69 fender to repair the 67 fender
 

 

 

 

 

 

 

 

 








      The section has no rust...
 

 

 

 

 

 

 

 

 








      The lower section and support of the 69 fender are in real nice shape.
 

 

 

 

 

 

 

 

 








      
 

 

 

 

 

 

 

 

 








      
 

 

 

 

 

 

 

 

 








      
 

 

 

 

 

 

 

 

 








      
 

 

 

 

 

 

 

 

 








      
 

 

 

 

 

 

 

 

 








      
 

 

 

 

 

 

 

 

 








      
 

 

 

 

 

 

 

 

 








      
 

 

 

 

 

 

 

 

 








      
 

 

 

 

 

 

 

 

 








      
 

 

 

 

 

 

 

 

 








      
 

 

 

 

 

 

 

 

 








      
 

 

 

 

 

 

 

 

 








      
 

 

 

 

 

 

 

 

 








      
 

 

 

 

 

 

 

 

 








      
 

 

 

 

 

 

 

 

 








      
 

 

 

 

 

 

 

 

 








      
 

 

 

 

 

 

 

 

 








      
 

 

 

 

 

 

 

 

 








      
 

 

 

 

 

 

 

 

 








      
 

 

 

 

 

 

 

 

 








      
 

 

 

 

 

 

 

 

 








      
 

 

 

 

 

 

 

 

 








      
 

 

 

 

 

 

 

 

 








      
 

 

 

 

 

 

 

 

 








      1966 Mustang Dash
 

 

 

 

 

 

 

 

 








      1966 Mustang Dash
 

 

 

 

 

 

 

 

 








      1966 Mustang Dash
 

 

 

 

 

 

 

 

 








      1966 Mustang Dash
 

 

 

 

 

 

 

 

 








      1967 Falcon Fenders after being epoxy primed inside
 

 

 

 

 

 

 

 

 








      1967 Falcon Fenders after being epoxy primed outside
 

 

 

 

 

 

 

 

 








      1967 Falcon Fenders after being epoxy primed outside
 

 

 

 

 

 

 

 

 








      Passenger side patch pannel outside
 

 
 It still needs a little hammer and dolly work
 

 
 This was the Red fender from above with the rusted out bottom
 

 

 

 

 








      Passenger side patch pannel inside
 

 
 This was the Red fender from above with the rusted out bottom
 

 

 

 

 

 

 








      Driver Side small patch
 

 

 

 

 

 

 

 

 








      Note that this drivers side fender antenna whole has been filled
 

 

 

 

 

 

 

 

 








      Antenna whole filled from inside
 

 

 

 

 

 

 

 

 








      I was wondering what the Ranchero might look like with a nice roll pan
 
 Here is a 1966 wagon...I like the clean look!
 

 

 

 

 

 

 

 








      I also really like the shelby like front valance
 

 

 

 

 

 

 

 

 








      Shelby like front valance from another angle
 

 

 

 

 

 

 

 

 









 Date: Sunday, 20-May-2012 12:04:10 MDT


Last Updated: Wednesday, 07-Dec-2005 20:51:59 MST

Page:(/~ranchero/tech/sheetmetal/sheetmetal.shtml) Page Maintained By: Innovative Systems & Services, Inc.









This site is not endorsed or affiliated with the Ford Motor Company in any way. 
This site is not endorsed or affiliated with the RancheroUS website in any way. 
This site is not endorsed or affiliated with the Denver Mustang Club in any way.
This site is not endorsed or affiliated with the Dearborn Classics in any way.
This site is not endorsed or affiliated with the AutoKrafters in any way.
All information, tips and links on this site are for use at your own risk and discretion. Modifcations on any vehicle will cause changes to the vehicles handling characteristics and or safety.  Information on this site does NOT meet US DOT requirements.  It is intended for offroad or show use only.